Technics continues to pursue the ideal sound by challenging new sonic dimensions realized by a full digital amplifier.
Features
JENO Engine
ADCT
(Active Distortion Cancelling Technology)
![circuit diagram of digital amplifier technology](https:///content/dam/pim/us/en/su/su-r10/su-r1000/ast-1262113.png.pub.thumb.644.644.png)
Advanced Speed Silent Power Supply
![graph of super high speed switching power supply picture of gan-fet(left) and sic diode(right)](https:///content/dam/pim/us/en/su/su-r10/su-r1000/ast-1262114.png.pub.thumb.644.644.png)
Four Independent Power Supply Units
![picture of pre amplifier](https:///content/dam/pim/us/en/su/su-r10/su-r1000/ast-1262115.png.pub.thumb.644.644.png)
High-grade Digital/Analog I/O Circuit
![pictures of component parts for high-grade digital/analog i/o circuit](https:///content/dam/pim/us/en/su/su-r10/su-r1000/ast-1262116.png.pub.thumb.644.644.png)
High Rigidity Chassis and Design
![picture of high rigidity chassis and design](https:///content/dam/pim/us/en/su/su-r10/su-r1000/ast-1262117.png.pub.thumb.644.644.png)
Input and output terminals made of meticulously selected high-quality parts
– Speaker terminals designed to allow connection of extra-large diameter speaker cables
– Y-lug terminals for ensuring reliable cable connection
– Neutrik-manufactured analogue balance input terminals and PHONO XLR input terminals (exclusively for MC)
– Analogue input terminals with gold-plated, machined brass parts
Technics’ refined design
– Attractive front panel embellished with high-quality hairline surface finish and equipped with an iconic, large dual-needle meter
– Volume dial and selector knob made of parts machined from solid aluminum blocks and spin-finished
Intelligent Phono EQ
Accurate EQ Curve – Made possible by hybrid analogue/digital circuit design
![picture of high rigidity chassis and design](https:///content/dam/pim/us/en/su/su-r10/su-r1000/ast-1262118.png.pub.thumb.644.644.png)
Crosstalk Canceller – For measurement and improvement of crosstalk characteristic unique to each cartridge
![graphic of crosstalk canceler](https:///content/dam/pim/us/en/su/su-r10/su-r1000/ast-1262112.png.pub.thumb.644.644.png)
PHONO Response Optimiser – For correction of disturbance in cartridge frequency characteristics
*The record may be warped depending on the storage environment in your house. Please note a badly warped record may not only disturb the measurement but also hurt the cartridge.
JENO Engine (Jitter Elimination and Noises-haping Optimisation)
ADCT (Active Distortion Cancelling Technology)
LAPC (Load Adaptive Phase Calibration)
Advanced Speed Silent Power Supply
Four Independent Power Supply Units
Intelligent Phono EQ
Accurate Digital Technology
-
JENO Engine (Jitter Elimination and Noise-shaping Optimisation)
LAPC (Load Adaptive Phase Calibration)
Advanced Speed Silent Power Supply
Battery Driven Clock Generator
Noiseless Signal Technology
Advanced Speed Silent Power Supply
Advancement of Power Supply
Technics Definitive Design
-
High-rigidity Cabinet
Three-section Configuration
FTC Output Power
-
150W + 150W ( 1kHz, T.H.D. 0.5 %, 8Ω, 20kHz LPF ),
300W + 300W ( 1kHz, T.H.D. 0.5 %, 4Ω, 20kHz LPF)
Input Sensitivity / Input Impedance
-
LINE 200 mV / 22 kΩ, PHONO (MM) 2.5 mV / 47 kΩ, PHONO(MC) 300uV /100Ω
Frequency Response
-
LINE 5 Hz-80 kHz (-3 dB, 8 Ω),
PHONO (MM) 20 Hz – 20 kHz (RIAA DEVIATION ±1 dB, 8 Ω)
DIGITAL 5 Hz – 80 kHz (-3 dB, 8 Ω)
Load Impedance
-
4 Ω-16 Ω
Analogue Input Terminal
-
LINE x 2 (LINE 1, LINE2), LINE XLR BALANCED x1, PHONO (MM/MC) x1, PHONO XLR BALANCED(MC) x1, MAIN IN x1, REC IN x1
Digital Input Terminal
-
Optical digital x2 (OPT 1, OPT 2) , Coaxial digital x2(COAX 1, COAX 2), USB-B x2 (PC 1, PC 2)
Analogue Output Terminal
-
PRE OUTx1, REC OUT x1
Headphone Output
-
Yes, Stereo Φ6.3mm
support Codec
-
USB 2.0 high-speed ,USB Audio Class 2.0, Asynchronous mode
Support Codec
-
PCM
-
Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
-
-
DSD
-
Yes (2.8 MHz, 5.6 MHz, 11.2 MHz, 22.4 MHz* *ASIO Native mode only)
-
Power Supply
-
AC 120 V ,60 Hz
Power Consumption
-
220 W
Dimensions (W x H x D)
-
430 mm x 191 mm x 459 mm
16-15/16 x 7-17/32 x 18-3/32 inch
Weight
-
Approx. 22.8 kg
Approx. 50.3lbs
Accessories
-
Remote Control, Calibration Record, AC Cord, Owner’s Manual